The grinding wheel spindle is supported by two special hydrodynamic bearings on the ends with five-point support, providing maximum rigidity and stability of spindle running. In case insufficient lubrication oil occurs, the spindle stops automatically to avoid wearing on the spindle and bearings.
| Special Vibration Absorbing Design |
The forced lubrication system of the grinding wheel spindle features vibration absorbing function. The oil film pressure, created by the hydrodynamic bearings, automatically absorbs vibration according to the current working condition.
| A Competitive Edge for Flexible Grinding |
The workhead can swivel 120°, variable spindle speed. The spindle can be fixed and runs reversibly, making it ideal for flexible grinding operations for internal and external cylindrical grinding applications.
CAPACITY |
ITEMS |
MODLE |
JHU-2706 |
JHU-2710 |
JHU-2715 |
JHU-3506 |
JHU-3510 |
JHU-3515 |
Capacity |
|
270 mm |
350 mm |
|
600 mm |
1000 mm |
1500 mm |
600 mm |
1000 mm |
1500 mm |
|
250 mm |
330 mm |
|
70 kgs |
130 kgs |
70 kgs |
130 kgs |
Workhead |
|
60Hz 11~500 Variable speed
50Hz 9~420 Variable speed |
|
120° (90° CCW ; 30° CW) |
|
MT.4 |
|
Setting, Normal and reverse rotation |
Worktable |
| (mm/min) Horizontal travel speed |
|
50 ~ 4000 |
50 ~ 3000 |
50 ~ 3000 |
50 ~ 3000 |
| Handwheel feed/revolution |
|
20 mm |
|
11° / 6° |
9° / 5° |
7° / 4° |
11° / 6° |
9° / 5° |
7° / 4° |
|
8 mm |
Wheel head |
| Grinding wheel size (Dia X Width X Bore) |
|
405 x 25 ~ 50 x 152.4 |
|
2000 |
| Grinding wheel speed (2 step) |
|
60 Hz 405:1499:1600(Standard)
50 Hz 405:1508:1603(Standard) |
| Total front and rear travel |
|
Grinding wheel 405:175 |
Grinding wheel 405:192 |
|
40 mm |
| Wheelhead total feed travel |
|
Grinding wheel 405:135 |
Grinding wheel 405:152 |
Grinding Wheel Feed |
| Handwheel feed/revolution |
|
1 mm |
Tail stock |
|
30 mm |
|
MT.4 |
Motor |
|
3.7KW, (5HP), 4P |
|
0.4KW, (1/2HP), 4p-100H, 150H |
|
1.5KW, (2HP), 4P |
| Compulsory lubrication motor |
|
0.2KW, (1/4HP), 4P |
|
0.2KW, (1/4HP), 4P |
|
0.03KW, (1/25HP), 4P |
|
1.5KW, (2HP), 2P |
|
1 KW |
|
1.5 KW |
Hydraulic
system |
|
60L |
| Compulsory lubrication tank |
|
22L |
|
100L |
G. Weight |
|
3150 |
4100 |
5150 |
3350 |
4300 |
5350 |
Packing
Size |
|
2800 |
3400 |
4400 |
2800 |
3400 |
4400 |
|
1650 |
1650 |
1650 |
1650 |
1650 |
1650 |
|
1820 |
1820 |
1820 |
1820 |
1820 |
1820 |
| * Manufacturer reserves the right to change specification without prior notice. |
CAPACITY |
ITEMS |
MODLE |
S40 |
|
|
Working
capacity |
| Max. swing oven table. |
mm |
|
Φ 400 |
|
|
| Max. distance between c.c. |
M |
|
1.5 |
2 |
3 |
3 |
4 |
5 |
3 |
4 |
5 |
| Max. weight of workpiece in centers. |
kg |
|
800 |
15000 |
18000 |
| Max. weight of workpiece in neck rests. |
kg |
|
1500 |
4000 |
6000 |
|
Φ400 |
Φ600 |
Φ850 ~ Φ600 |
|
Φ5-400 |
|
|
|
By program |
Wheelhead
&
Carriage
(X axis) |
| Wheel size (O.D.xWidthxBore) |
mm |
|
Φ500 x Φ152.4 x Φ50 |
Φ760 x Φ304.8 x Φ50 |
| Type of lubricating system |
- |
|
Hydrostatic & dynamic system |
| Rotating speed of wheel |
R.P.M |
|
100-1800 |
300-1200 |
| Max. cross feed rate |
mm/min |
|
1000 |
2000 |
| Cross feed per pulse |
mm/p |
|
0.0001 |
Table
(Z axis) |
| Travel of table or head (Z axis) |
mm |
|
Center Distance+200 |
| Travel speed of table |
mm/min |
|
25-3000 25-6000 |
| Type of lubricating system |
- |
|
Hydrostatic & dynamic system |
Neck rests |
| Roll neck diameter range |
mm |
|
Φ30-Φ120 |
Φ50-Φ250 |
Workhead
&
Talstock |
| Rotaion speed of work heed |
R.P.M |
|
10-150 |
10-100 |
|
MT#5 |
MT#6 |
| Moving speed of tailstock |
mm/min |
|
Manual |
|
50 |
80 |
Power
rating |
|
15 |
30 |
40 |
|
3 |
7.5 |
10 |
| Table traverse motor (Z axis) |
NM |
|
12 |
22 |
30 |
|
8 |
12 |
| Cross feed motor (X axis) |
HP |
|
2HP/220Liter |
2HP/320Liter |
2HP/450Liter |
G. Weight |
|
8290 |
8580 |
9780 |
11200 |
12800 |
14400 |
11800 |
13400 |
15000 |
Packing
Size |
|
6500 |
7500 |
9500 |
10795 |
12795 |
14795 |
11800 |
13800 |
15800 |
|
2280 |
2280 |
2280 |
2280 |
2280 |
2280 |
2280 |
2280 |
2280 |
|
1500 |
1500 |
1500 |
1650 |
1650 |
1650 |
1650 |
1650 |
1650 |
 |
 |
 |
| A. Tools and Tool box |
B. Grinding wheel and grinding wheel flange |
C. Wheel Dressser |
 |
 |
|
| D. 2-point center rest (1m, 1.5m) |
E. Water pump and tank |
|
 |
 |
 |
| A. Magnetic Separator |
B. Balancing Arbor |
C. Balancing Base |
 |
 |
 |
| D. 3-jaw Chuck |
E. 3-Point Center Rest Assembly(Big) |
F. 3-Point Center Rest Assembly(Small) |
 |
 |
|
| G. High Speed Spindle (8,000~20,000rpm) |
H.Center Ring and Jaw Plate(6", 7") |
|
|
